🚚
Free Standard ShippingStickers: No Minimum | Other Orders $59+ | Contiguous U.S.; Exclusions Apply
✓
Free Artwork ReviewWithin 24hrs
◷
Production TimingSee product lead times
♡
Small Orders AvailableMinimums vary by product
✣
Bulk DiscountsThe more you buy, the more you save
Filter

Choose your shape. Upload your drawing.

Unprinted acrylic • Maximum width × maximum height • Special-shape setup $15 • Holes $1.50 each

Choose your acrylic material

Clear, Colored and Mirror — the same colors and thicknesses as Acrylic Sheets. Select a material below to enter dimensions and upload your shape.

Reset

Custom Acrylic Cutting

Clear Acrylic Custom Cutting

From $0.71

Custom Acrylic Cutting

Colored Acrylic Custom Cutting

From $0.82

Custom Acrylic Cutting

Mirror Acrylic Custom Cutting

From $1.00
Product details & buying guide

Custom acrylic cutting without printing. Choose your shape first, then Clear, Colored or Mirror acrylic. Upload your custom outline, set maximum width and height, and choose thickness, holes and quantity. Special-shape setup $15; holes $1.50 each per piece.

Choosing Custom Acrylic Cutting

Start with the viewing distance and installation location. Compare finished size, material, thickness, mounting options and print sides in the order form.

Compare these Custom Acrylic Cutting options from CustomGoods.

Seller: CustomGoods · Willow Grove, PA 19090, United States.

About CustomGoods · Shipping information · Returns policy

Compare Custom Acrylic Cutting options

ProductListed specificationsStarting configuration
Clear Acrylic Custom CuttingSee the product options and specificationsSee product options
Colored Acrylic Custom CuttingSee the product options and specificationsSee product options
Custom Cut — Amber Mirror Acrylic SheetColor: Orange; Finish / transparency: Glossy, Mirror; Thickness: 1/8" (0.118" / 3.0mm)$41.49
12 x 24 in, 1/8" (0.118" / 3.0mm), rectangle, standard edges, no holes or engraving, quantity 1
Custom Cut — Amber Transparent Acrylic SheetColor: Orange; Finish / transparency: Glossy, Transparent; Thickness: 1/4" (0.220" / 5.6mm), 1/8" (0.118" / 3.0mm)$11.15
12 x 24 in, 1/8" (0.118" / 3.0mm), rectangle, standard edges, no holes or engraving, quantity 1

Compare the complete size, material and order quantity before ordering. Prices refer to the stated starting configuration; selected options, shipping and tax can change the final total.

Ordering questions

How is cut-to-size acrylic priced?

The calculator uses the material, thickness, ordered dimensions and quantity. Selected edge polishing, holes, custom paths or engraving add their applicable charges. Review the complete configuration total.

How should I specify holes and custom shapes?

Select the available shape and hole options. Provide hole diameter and center inset in the selected unit; supply a dimensioned drawing and the requested processing measurements for custom placement or cutting paths.

Can every material be polished or engraved?

Available processing depends on the selected material, thickness and dimensions. Use the options enabled for that product; unsupported combinations must be reviewed before ordering.

Should I choose 1/8-inch or 1/4-inch acrylic?

Choose thickness for the panel size, support and intended use. 1/4-inch acrylic is more rigid than 1/8-inch acrylic, but large or unsupported panels still need suitable mounting. Confirm the available thickness for your selected material.

Can acrylic be used outdoors?

Suitability depends on the acrylic grade, printed finish, exposure and mounting. Confirm the selected product for outdoor use, especially mirrors, specialty finishes and wind-exposed installations.

What is the difference between front and reverse printing?

Front printing places ink on the viewed surface. Reverse printing places artwork behind clear acrylic so it is viewed through the sheet. White ink and artwork preparation depend on the selected print option.

What is the minimum order quantity?

Stock sheets and standard configured cutting or sign examples are shown for one piece where available. Bulk keychains, pins and other packs have their own minimum quantities. Check the selected product.

How long does production take?

The clear UV printed sign listing specifies 3 business days after complete artwork and timely approval. Sheet, cutting and fabricated-product schedules depend on the selected product and processing; confirm the listing or request a production estimate. Carrier transit is additional.

Can I supply SVG or DXF cutting artwork?

Supply a dimensioned vector drawing for a custom shape and identify holes, engraving and finished dimensions. Use a file type accepted by the product upload field. If SVG or DXF is not listed, contact support before submitting it.