Choose a 4 × 6 magnetic frame for photo prints
A standard 4 × 6 photo has a 2:3 aspect ratio. This frame suits a portrait on a reception desk or a small photograph beside a guest book. Crop the image to the finished print dimensions before sending it to print. Keep faces away from the trim edge and check the orientation of horizontal shots. The listed dimensions describe the insert; allow space for the surrounding acrylic when laying out several frames.
Configuration price examples
| Exact configuration | Quantity | Product total |
|---|---|---|
| 4 × 6 in media, clear acrylic, 9.525 mm stock, no branding, no insert — customer supplies | 1 | $19.99 |
| 4 × 6 in media, clear acrylic, 9.525 mm stock, no branding, no insert — customer supplies | 10 | $187.99 |
Each amount is the total for the configuration and quantity shown. Optional changes, design services, applicable tax and delivery are additional unless included in that selection.
Standard configurations use the live acrylic calculator and its configured-order cart button. Enter your dimensions, select all processing and upload required artwork or a drawing. Custom processing requiring review must be confirmed before ordering.
Custom Acrylic Magnetic Photo Frame — 4 × 6 in
Two clear acrylic panels hold a photograph, menu or graphic between corner magnets. Specify the media size, panel thickness and portrait or landscape orientation. The outer frame is larger than the media area to allow clearance for magnets.
Reference sizes and custom dimensions
- Reference media size — Width 4 in (101.6 mm) × Height 6 in (152.4 mm)
- Custom dimensions
Select the dimension basis before entering sizes. Inches and millimeters refer to the same physical dimensions. For hollow products, inside usable dimensions exclude wall thickness; outside dimensions describe the complete envelope. For media holders, input is the paper or graphic size, with the outer border and supporting foot confirmed separately.
Product-specific options
| Acrylic color | Clear |
|---|---|
| Acrylic thickness | 3/8 in (9.525 mm) per panel · 1/4 in (6.35 mm) per panel |
| Orientation | Portrait · Landscape |
| Construction | Two panels with corner magnets |
| Placement | Counter / tabletop |
| Printed insert | No insert — customer supplies · Printed paper insert |
| Edge finish | Polished edges · Smooth machined edges |
| Branding | No branding · UV printed logo / artwork · Laser engraving |
Construction and fit
Reference frame uses two 3/8 in panels (3/4 in total). Media dimensions exclude magnets; the production drawing confirms the outer border and safe artwork area.
Choose the complete layout rather than assuming a photographed accessory is included. Pocket openings, groove dimensions, magnetic borders, lid fits, hinges, slots and mounting locations are reviewed on a dimensioned drawing as applicable to this product. Large spans, unusual loads, exact tolerances and specialty stock need approval.
Artwork, printing and engraving
For a logo or printed graphic, provide vector PDF, AI or SVG with outlined fonts, or a high-resolution PNG at the final production size. Identify the surface, graphic size, orientation, white-ink requirement and any back-side artwork. For engraving, label the engraved area and the intended appearance. Select no branding for a plain fabricated product.
Ordering your selected configuration
Review the confirmed total and selected dimensions, attach artwork if the selected processing requires it, and add the configuration to your cart.
Care and example images
Remove protective film after installation. Clean with a soft damp non-abrasive cloth and an acrylic-compatible cleaner. Avoid solvents and rough scrubbers. Photos show possible configurations or custom design illustrations; printed inserts, books, plants and other props are not included unless explicitly quoted. This product is made to the approved CustomGoods drawing.
| Printed product type | Magnetic photo frame |
|---|---|
| Size | Custom dimensions, Reference media size |
| Color | Clear |
| Thickness | 1/4 in (6.35 mm) per panel, 3/8 in (9.525 mm) per panel |
| Construction | Two panels with corner magnets |
| Placement | Counter / tabletop |
| Effect / finish | Polished edges, Smooth machined edges |
| Branding | Laser engraving, No branding, UV printed logo / artwork |
| Sign Material | Acrylic |
| Sign Type | Acrylic Sign Holders & Frames |
Production, delivery and order planning
Standard production: 3 business days. Complete artwork and timely proof approval are required; missing information or delayed approval can shift dispatch. Local delivery currently applies to this acrylic configuration; availability, timing and charges require confirmation for the delivery location. Arrival estimates are not an event-date guarantee. Customized products follow the published returns policy.
For a deadline, send the exact configuration, artwork status, production quantity, delivery ZIP and required arrival date to support@customgoods.com. Review the shipping policy and custom-order returns policy.

















Reviews
There are no reviews yet.