Use a slotted block for names and reserved places
The 3-inch-wide reference block supports a name card at a panel discussion or a reserved-place card at dinner. Print a test name at the final size and leave a margin along the bottom for the part that sits inside the groove. For an event with changing assignments, prepare spare inserts and reuse the bases. Measure folded or laminated cards at their thickest point before ordering the slot.
Configuration price examples
| Exact configuration | Quantity | Product total |
|---|---|---|
| 3 × 0.5 in block footprint, clear acrylic, 12.7 mm stock, no branding, no printed insert | 1 | $15.99 |
| 3 × 0.5 in block footprint, clear acrylic, 12.7 mm stock, no branding, no printed insert | 10 | $60.99 |
Each amount is the total for the configuration and quantity shown. Optional changes, design services, applicable tax and delivery are additional unless included in that selection.
Standard configurations use the live acrylic calculator and its configured-order cart button. Enter your dimensions, select all processing and upload required artwork or a drawing. Custom processing requiring review must be confirmed before ordering.
Custom Acrylic Slotted Block Sign Holder
Display price cards, table numbers or small informational signs in a polished acrylic block with a machined slot. Choose the block envelope and the insert thickness so the groove is matched to your actual card or sign.
Reference sizes and custom dimensions
- Reference block size — Width 3 in (76.2 mm) × Depth 1.5 in (38.1 mm)
- Custom dimensions
Select the dimension basis before entering sizes. Inches and millimeters refer to the same physical dimensions. For hollow products, inside usable dimensions exclude wall thickness; outside dimensions describe the complete envelope. For media holders, input is the paper or graphic size, with the outer border and supporting foot confirmed separately.
Product-specific options
| Acrylic color | Clear · Black |
|---|---|
| Acrylic thickness | 1/2 in (12.7 mm) |
| Insert / groove width | 1/16 in (1.5875 mm) · 1/8 in (3.175 mm) · Custom — specify in notes |
| Placement | Counter / tabletop |
| Edge finish | Polished edges · Smooth machined edges |
| Branding | No branding · UV printed logo / artwork · Laser engraving |
Construction and fit
Groove depth and angle are confirmed on the drawing. Reference holders use approximately 1/4 in groove depth. Overall height is fixed by the selected block thickness.
Choose the complete layout rather than assuming a photographed accessory is included. Pocket openings, groove dimensions, magnetic borders, lid fits, hinges, slots and mounting locations are reviewed on a dimensioned drawing as applicable to this product. Large spans, unusual loads, exact tolerances and specialty stock need approval.
Artwork, printing and engraving
For a logo or printed graphic, provide vector PDF, AI or SVG with outlined fonts, or a high-resolution PNG at the final production size. Identify the surface, graphic size, orientation, white-ink requirement and any back-side artwork. For engraving, label the engraved area and the intended appearance. Select no branding for a plain fabricated product.
Ordering your selected configuration
Review the confirmed total and selected dimensions, attach artwork if the selected processing requires it, and add the configuration to your cart.
Care and example images
Remove protective film after installation. Clean with a soft damp non-abrasive cloth and an acrylic-compatible cleaner. Avoid solvents and rough scrubbers. Photos show possible configurations or custom design illustrations; printed inserts, books, plants and other props are not included unless explicitly quoted. This product is made to the approved CustomGoods drawing.
| Printed product type | Slotted card / sign holder |
|---|---|
| Size | Custom dimensions, Reference block size |
| Color | Black, Clear |
| Thickness | 1/2 in (12.7 mm) |
| Placement | Counter / tabletop |
| Effect / finish | Polished edges, Smooth machined edges |
| Branding | Laser engraving, No branding, UV printed logo / artwork |
| Sign Material | Acrylic |
| Sign Type | Acrylic Sign Holders & Frames |
Production, delivery and order planning
Standard production: 3 business days. Complete artwork and timely proof approval are required; missing information or delayed approval can shift dispatch. Local delivery currently applies to this acrylic configuration; availability, timing and charges require confirmation for the delivery location. Arrival estimates are not an event-date guarantee. Customized products follow the published returns policy.
For a deadline, send the exact configuration, artwork status, production quantity, delivery ZIP and required arrival date to support@customgoods.com. Review the shipping policy and custom-order returns policy.















Reviews
There are no reviews yet.