Custom Acrylic Wide Block Sign Holder
Display price cards, table numbers or small informational signs in a polished acrylic block with a machined slot. Choose the block envelope and the insert thickness so the groove is matched to your actual card or sign.
Reference sizes and custom dimensions
- Reference block size — Width 5 in (127 mm) × Depth 1.5 in (38.1 mm)
- Custom dimensions
Select the dimension basis before entering sizes. Inches and millimeters refer to the same physical dimensions. For hollow products, inside usable dimensions exclude wall thickness; outside dimensions describe the complete envelope. For media holders, input is the paper or graphic size, with the outer border and supporting foot confirmed separately.
Product-specific options
| Acrylic color | Clear · Black |
|---|---|
| Acrylic thickness | 1/2 in (12.7 mm) |
| Insert / groove width | 1/16 in (1.5875 mm) · 1/8 in (3.175 mm) · Custom — specify in notes |
| Placement | Counter / tabletop |
| Edge finish | Polished edges · Smooth machined edges |
| Branding | No branding · UV printed logo / artwork · Laser engraving |
Construction and fit
Groove depth and angle are confirmed on the drawing. Reference holders use approximately 1/4 in groove depth. Overall height is fixed by the selected block thickness.
Choose the complete layout rather than assuming a photographed accessory is included. Pocket openings, groove dimensions, magnetic borders, lid fits, hinges, slots and mounting locations are reviewed on a dimensioned drawing as applicable to this product. Large spans, unusual loads, exact tolerances and specialty stock need approval.
Artwork, printing and engraving
For a logo or printed graphic, provide vector PDF, AI or SVG with outlined fonts, or a high-resolution PNG at the final production size. Identify the surface, graphic size, orientation, white-ink requirement and any back-side artwork. For engraving, label the engraved area and the intended appearance. Select no branding for a plain fabricated product.
Drawing approval and quotation
Your selected dimensions, quantity and options are transferred to the quote request. Attach a sketch or dimensioned drawing if available. Fabrication, printing, engraving, hardware, delivery, lead time and the final price are confirmed before production. This configurable listing is a quotation request rather than an immediate payment order.
Care and example images
Remove protective film after installation. Clean with a soft damp non-abrasive cloth and an acrylic-compatible cleaner. Avoid solvents and rough scrubbers. Photos show possible configurations or custom design illustrations; printed inserts, books, plants and other props are not included unless explicitly quoted. This product is made to the approved CustomGoods drawing.
Reviews
There are no reviews yet.